$0.00
You have no items in your shopping cart.

0

07-18 Wrangler JK

07-18 Wrangler JK

Items 1 to 10 of 59 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

  1. 50" Light Bar Mounts

    50" Light Bar Mounts

    The Garvin Industries light mount brackets easily attach a 50”L light bar to the front of our 4”H Expedition Rack. All mounting brackets are made from heavy-duty steal plates and require no drilling to install. Please note- this mount will only work on our 4”H Expedition Rack with a straight up and down front rack end. The light bar must be straight in order to attach. Curved light bars will not work. Each kit includes all the necessary mounting hardware required for installation. Light bar not included.
    $98.00
  2. Expedition Half-Rack, 07-17 JKU Wrangler Hard-Top

    Expedition Half-Rack, 07-17 JKU Wrangler Hard-Top

    -Rack Dimensions:  54"W by 58"L by 4"H

    -Allows you to remove the front hard-top sections and have no rack above.

    -Mounts directly to hard-top with track mount and the back body of the Jeep.

    -Will only work on 4-Door models with hard-top.

     

     

     

     

     

    $1,199.00
  3. G2 Series Rear Bumper, No Swing-Away, JK Wrangler

    G2 Series Rear Bumper, No Swing-Away, JK Wrangler

    -Bumper is made from 2" x 5" x 3/16" tubular steel

    -1/4" aluminum end caps for style and strength

    -Will hold up to a 35" diameter tire

    -Compatible with factory installed trailer hitch

    -Note! This is a bumper only

     

     

     

    The G2 Series Rear Bumper is constructed with 2" x 5" tubular steel, 3/16" thick. The end caps are constructed with 1/4" aluminium for a stylish look to the bumper. Comes with heavy duty clevis mounts designed for vehicle retreival. Our bumper will accommodate a 35" dia. tire. This is a bumper only! A swing-away tire carrier cannot be added to this bumper. Fits on all JK Wranglers. Compatiable with factory receiver hitch.

    $1,150.95
  4. G2 Series Rear Bumper Tire Carrier, JK

    G2 Series Rear Bumper Tire Carrier, JK

    -Bumper is made from 3/16" tubular steel
    -Heavy duty 1 1/2" pivot assembly
    -1/4" aluminum end caps for style and strength
    -Rattle free quick clamp assembly
    -Will hold up to a 37" diameter tire
    -Hi-lift jack mount bracket is included.
    -Compatible with factory installed trailer hitch

    -Note! optional accessories shown in photo are not included and must be purchased separately.

    $1,969.00
  5. Expedition Rack, 07-18 JK Wrangler, 4-Door

    Expedition Rack, 07-18 JK Wrangler, 4-Door

    - Rack Dimensions:  54"W by 93.5"L by 4"H
    - Will safely hold up to 300 lbs off road and 500 lbs static weight
    - Rack can be tilted to raise or lower the soft top
    - Factory hard-top front sections can be removed without tilting the rack
    - Minor drilling required for installation

     

    $1,498.00
  6. Expedition Rack, 07-18 JK Wrangler, 2-Door

    Expedition Rack, 07-18 JK Wrangler, 2-Door

    -Rack Dimensions:  54"W by 72"L by 4"H

    -Will safely hold up to 300 lbs off road and 500 lbs static weight

    -Rack can be tilted to raise or lower the soft top

    -Factory hard-top front sections can be removed without tilting the rack

    -Minor drilling required for installation

    $1,298.00
  7. Expedition Full Rack, 18-19 JL Wrangler, 4-Door, Hard-Top

    Expedition Full Rack, 18-19 JL Wrangler, 4-Door, Hard-Top

    - Fits all JL, 4 Door models, hard top only
    - 54”W by 93.5”L by 4’H
    - The rack sits 9” above the top of the factory rain gutter, near the front of the Jeep and 8.5” in the rear
    - No drilling required for installation. Rack attaches near the front windshield and underneath the body in the rear
    - Supports are made from 1 ¼” square tubing
    - Holds up to 300 lbs normal driving and 600 lbs. static weight
    - With our crossbar kit #29210, the half rack is perfect for a roof top tent
    - Optional wind deflector is available, #29964

    $1,599.00
  8. Expedition Half Rack, 18-19 JL Wrangler, 4-Door

    Expedition Half Rack, 18-19 JL Wrangler, 4-Door

    - Fits all JL, 4 Door models, hard top only
    - 54”W by 56”L by 4’H
    - The rack sits 9” above the top of the factory rain gutter, near the front of the Jeep and 8.5” in the rear
    - No drilling required for installation. Attaches to rear Jeep body and to the hard top gutter.
    - Supports are made from 1 ¼” square tubing
    - Holds up to 250 lbs normal driving and 600 lbs. static weight
    - With our crossbar kit #29210, the half rack is perfect for a roof top tent
    - Optional wind deflector is available, #29960

    $1,299.00
  9. Expedition Rack Crossbar Kit (with crossbars)

    Expedition Rack Crossbar Kit (with crossbars)

    • Kit includes 4 mounting brackets and two 58”L crossbars. • Compatible with Yakima mounts. • Adjustable to fit your application. • Great for Roof Top Tents (ARB & AutoHomeUSA) • Powder coated
    $195.00
  10. Can Holder, Trail Rack, RotoPax

    Can Holder, Trail Rack, RotoPax

    • Attach a Rotopax can and LOX Pack Mount to JK or FJ Trail Rack. • Will accept either a 3-gallon gas or 2-gallon water Rotopax can. • Each kit includes one mount. • Add a kit to each side for extra capacity. • Rotopax cans and LOX Pack Mounts are required and sold separately.
    $57.00

Items 1 to 10 of 59 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List